- Putty hyperterminal install#
- Putty hyperterminal serial#
- Putty hyperterminal windows 10#
- Putty hyperterminal software#
To log this information to disk on your host computer, follow this procedure:ġ. Note: In a troubleshooting situation, it might be useful to copy the information displayed in the terminal window and send that in to technical support. Flip the Console Out switch back to OFF when done troubleshooting. Power on the controller, and observe the output on the PC's terminal window.ĩ. If your controller does not have DIP switches see Additional Notes #2.Ĩ. On the controller, flip the Console Out DIP switch to the ON position. See Additional Note #3 if using cRIO-903x or cRIO-906x.ħ.
Putty hyperterminal serial#
Select Serial and the COM port that the cable is attached to on the PC (typically COM1).ĥ. PuTTY is located in the folder in which you stored the downloaded executable.Ĥ. Connect the controller to a PC using a null modem serial cable.ģ. To view the output from the Console Out through the COM1 serial port, follow the following procedure:Ģ.
Putty hyperterminal install#
Therefore, if you would like to use the Console Out feature of your device, you will need to download and install a 3rd party terminal emulator. HyperTerminal is not included with Windows Vista, Windows 7, and Windows 8. Navigate to the Console Task, which looks like this: If you are using an earlier version or are having trouble communicating over the network, skip ahead to follow the procedure for your Operating System below.įirst ensure that NI Web-Based Configuration and Monitoring is installed on your controller by viewing it in MAX, then follow one of the methods provided in the LabVIEW Help to access the Configuration Page.
Note that this feature is not available on targets running the Linux Real-Time operating system. If you are using LabVIEW Real-Time 2010 or later, you can view the output from the Console Out using the NI Web-Based Configuration and Monitoring.
Putty hyperterminal windows 10#
View Console Out output Windows 10 & Web-Based Configuration and Monitoring
Putty hyperterminal software#
PuTTY is open source software that is available with source code and is developed and supported by a group of volunteers.īelow suggestions are independent of the authors of PuTTY. PuTTY is an SSH and telnet client, developed originally by Simon Tatham for the Windows platform. Download PuTTY - a free SSH and telnet client for Windows